Skylink DM-50 User Manual download pdf (Page 19)

–

INSTALLATION - OUT SWING

Slider bracket

Note: Out-Swing right door installation shown. Note: Out-Swing left door installation shown.

3. Installing the operator assembly onto the mounting plate

3.1 Remove the 2 side covers from the operator by sliding them out.

3.2 Place the operator onto the mounting plate based on the door type. For

instance, for out swing right door, the “OUT-SWING RIGHT” holes should

match the 2 top holes of the operator.

3.3 Secure the operator to the mounting plate with 6 nuts, spring washers and

bolts.

For Out-Swing Left installation, place the top

2 screws of the door opener to these 2 holes.

IN-SWING RIGHT

IN -SWI N G LEFT

OUT-SWING RIGHT

OU T-SW IN G LE FT

WARNING

To avoid possible serious

injury from a falling door

operator, fasten it securely

to the mounting plate and

the supports of the door.

Top 2 screws match the

2 holes with marking

"OUT SWING

RIGHT".

7-1/2" (Approx. 190mm)

Remove

side cover

Remove

side cover

Actual size

x6 x6 x6

–

INSTALLATION - OUT SWING

6. Attach the door arm assembly on the operator

6.1 The door should remain at the fully closed position.

6.2 Slide one end of the arm assembly (the end with the slider)

into the slider bracket.

6.3 Place the other end of the arm assembly on top of the

operator motor shaft. You may notice the arm assembly

coupling is not fully seated into the slots of the operator

motor shaft. In order for the arm assembly to seat fully into

the slots of the operator motor shaft, open the door slowly to

about 75 degrees from the fully open position. You should

feel the arm is now seated all the way into the slots, and

you can visual check to confirm.

Slider

6.4 Tighten the arm assembly to the operator motor shaft by a screw, spring washer, and a flat washer.

Actual size

Arm is seated

fully into the

shaft.

~75°

1 2 ... 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Skylink DM-50 User Manual Page 19

Comments to this Manuals

Related products and manuals for Kitchen Skylink DM-50