9. OTHER HOUSEHOLD ALERT
®
SENSORS
The Household Alert
®
receiver can work with up to 4 different sensors:
garage door monitor sensors, door / window sensors, water sensors,
indoor/outdoor motion sensors, etc. Please visit www.skylinkhome.com
to fully utilize your Garage Door Monitor
TM
.
10. WARRANTY
If, within one year from date of purchase, this product should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or
replaced, without charge. Proof of purchase and a Return Authorization are required.
If you would like to order Skylink’s products or have difficulty getting them to work,
please :
1. visit our FAQ website at www.skylinkhome.com , or
11. CUSTOMER SERVICE
CAPITAL PROSPECT LTD.
Rm.1303, 13/F, Block B, Veristrong Ind. Centre,
36 AuPuiWan Street, Fo Tan, Hong Kong
Tel: +852 2602-1318 Fax: +852 2602-4684
http://www.skylinkhome.com
P/N. 101A251-001 Rev.1
©2005 SKYLINK GROUP
6. BUZZER VOLUME
You can select the buzzer volume by
switching the volume switch to “HI” or
The buzzer can be disabled by switching
7. MUTE
When the battery level on the sensor drops to a certain level, or the
sensor is out of the operating range, the receiver will show a “loss of
signal” indication. The red LED representing that zone will flash rapidly,
i.e. if zone 1 sensor is lost, the zone 1 red LED will flash rapidly.
When the loss of signal indication occurs, move the receiver closer to
the corresponding sensor and trigger that sensor. If the red LED stops
flashing rapidly, that means the receiver or sensor needs to be relocated
.
If the “loss of signal” indication persis
ts, replace the battery of that sensor.
8. LOSS OF SIGNAL INDICATION
When a sensor is triggered for a long period of time, you may stop the
buzzer by pressing the mute button. When another signal comes again,
sable the buzzer for all currently activated sensors by pressing
mute button. The receive will beep again if it receives another signal.
For instance, if you are working on your
lawn with the garage door open, you may
want to disable the buzzer for this garage
door only. Then you can press the “Mute”
button after it starts to sound. If any other
sensor is triggered, the receiver will sound
When the garage door is open, the sensor will send a signal to the
receiver. It will beep and the corresponding zone red LED will flash.
is set to zone 1, zone 1 red LED on the receiver will flash,
and the receiver will emit a continuous “single beep”, i.e. “beep” pause,
If the sensor is set to zone 4, zone 4 red LED will flash, and the receiver
tinuous “4 beeps”, i.e. “beep beep beep beep” pause “beep
beep beep beep” pause ……etc.
By the number of beeps emitted by the receiver, user can identify which
5. OPERATION
ote: Mount the sensor near the top of the garage door for best results.
Note: Ensure you straighten up the antenna on the receiver to receive the best
Double-sided
foam tape
Mounting plate
and screws
(optional)
Sensor
4. INSTALLATION (CONT)
(4 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals